Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Chris Foss ARTF
Super Flying Model
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Piceler Hispeed ARF PNP Blue
If you have sucessfully mastered our famous SPEED model, you are ready for your next challenge.
The 200km/h+ HiSpeed
is here. Breathtaking high speed flights or slow pass-by and landings. It´s in your hands ... enjoy the thrill. "Speed" is available in three different colors (red, blud and yellow).
Best of all, it comes as PNP (Plug-and-Play) 95% pre-built, including the perfect brushless motor, brushless ESC, fast Mini-Servos and a high-performance propeller.
• ARF model airplane
• All-woood construction (lasercut)
• Expertly covered with printed covering film
• Very few assembly work left
• 1-piece main wing
• Hardware, Accessories and illustrated instructions
(Functions) Ailerons Elevator
200 Watt Brushless Antrieb
3 x Mini Servo (High Speed)
Part No: 403228
Item Name: Piceler Hispeed ARF PNP Blue
Seagull Challenger Kit
ARTF kits are great, we all love ‘em and we all appreciate the time savings they provide, however a growing number of R/C flyers are finding that, having assembled one or two ARTFs, what they really fancy is a stab at traditional building. Some choose a plan build for their first foray into balsa-bashing but most seek a simple kit, a kit such as the Seagull Challenger, that offers all the advantages of laser cut parts, carefully chosen hardware and an instruction manual that guides you step-by-step through the build process.
In truth, the Challenger is the perfect choice for not only does it ensure a problem-free build, it offers an opportunity to produce a one-off model in a colour scheme of your choice and promises a fantastic, agile aerobatic flight performance when you’re finished. Building your own R/C model is absorbing, enjoyable and immensely satisfying and that’s why so many are deciding to give it a go. It’s also why the Challenger kit is such a popular choice amongst sport flyers and those seeking a good follow-on aerobat.
• Suits i.c. or electric power.
• Makes a perfect follow-on trainer.
• Takes 4-channel radio with 5 servos.
• Accurate laser-cut parts.
• Interlocking parts for easy assembly.
• Two cowl options - choose balsa side cheeks or full moulded cowl.
• Pre-painted pilot figure.
• Full-size plan.
• Practical upright engine installation.
.40 - .46 2-Stroke (Req.)
.52 - .61 4-Stroke (Req.)
Part No: 5500004
Item Name: Seagull Challenger Kit
Seagull P-51 Mustang ARTF (SEA-276)
Very few R/C warbirds fly as well as the Mustang, indeed this terrific 56” span version for 5 / 6 function radio only goes to prove the point. Built from lightweight CNC-cut balsa and ply, wrapped in matt Oracover and displaying the colour scheme of US Army Air Force P-51D ‘Hurry Home Honey’, it’s the perfect choice for your .60 two-stroke, .70 four-stroke, or electric equivalent powerset. Perfect for popping in the car in one piece this gem of a model is an everyday warbird with the look and performance of something twice its size.
Supplied with a fixed undercarriage as standard, the recommended conversion to electric retracts is both convenient and easy, with mounting blocks, wheel wells and leg covers either pre-installed or supplied for retro-fit.
• Lightweight, CNC-cut balsa and ply construction.
• Evocative scale colour scheme.
• Covered in genuine matt finish Oracover film.
• Factory painted fibreglass engine cowl.
• Detailed cockpit with lightweight painted pilot figure.
• Forward fuselage hatch for easy tank and flight battery access.
• Full hardware pack included for either glow or electric power.
• Includes parts for fitting optional retracts (available separately).
.60 2-Stroke (Req.)
.70 4-Stroke (Req.)
5-6 Channels (Req.)
Part No: 5500007
Item Name: Seagull P-51 Mustang ARTF (SEA-276)
Seagull Ultimate .55 ARTF
.46-.55 2-Stroke (Req.)
.72-.82 4-Stroke (Req.)
6 Channel (Req.)
6-7 lb (2.7-3.2kg)
Part No: 5500010
Item Name: Seagull Ultimate .55 ARTF
CAP232 (46) 1.45m (SEA-97)
The CAP 232 was designed with the intermediate/advanced sport scale in mind. It is a semi scale airplane which is easy to fly and quick to assemble. The airframe is conventionally built using balsa, plywood to make it stronger than the average ARTF , yet the design allows the aeroplane to be kept light.
You will find that most of the work has been done for you already. The motor mount has been fitted and the hinges are preinstalled. Flying the CAP 232 is simply a joy.
Electric conversion kit included FREE!
Factory covered with Oracover
Ready-made—minimal assembly & finishing required.
Other items will be required to complete such as engine and radio control equipment
Suits - 46-52 2-Stroke (70 4-Stroke)
flying weight - 7.5lb (3.4kg)
Part No: 5500046
Item Name: CAP232 (46) 1.45m (SEA-97)
Westland Lysander III (SEA-216)
Click here to see a slideshow.
Even at the time of its maiden flight in 1936 Westland’s answer to the the 1934 Air Ministry specification that called for an army co-operation and liaison aircraft was, to be honest, looking rather dated. Even so, with its fully automatic wing slots, slotted flaps and variable incidence tailplane the Lysander was aerodynamically advanced, offering its pilots a stall speed of just 65mph and an enviable STOL capability. So it was, then, that the Lysander beat Bristol’s Type 148, won the contract, and entered the popular annals of history.
Rugged, gull-winged, bespatted, and powered by Bristol Mercury radial, this ugly duckling of a warbird was destined only to endear itself to all who clapped eyes on it, and so it is with Seagull’s carefully considered 50cc facsimile. It’s a beauty!
Presented in the eye-catching colour scheme of LX-L, a Lysander III housed at Hendon’s Royal Air Force Museum, this 118” span high quality balsa / ply ARTF comes factory covered in genuine matt finish Oracover film and features a detailed cockpit, two piece plug-in wings (to simplify transport and assembly) and, crucially, all the necessary hardware for either glow or electric power.
Take it from us, this model flies in a wonderful scale fashion and will happily cruise around performing gentle circuits and bumps all day long. Add flap, dial in a little elevator compensation, and the STOL characteristics of the full-size really come to the fore. All-in-all a gentlemanly aeroplane in every sense but with the benefit of coordinated aileron / rudder turns to keep it real and maintain the challenge.
1471 sq. in.
Part No: 5500158
Item Name: Westland Lysander III (SEA-216)
Steen Skybolt N250SB 15cc
The Steen Skybolt is an American home-built aerobatic biplane. Originally designed by Lamar Steen as an engineering project, the prototype first flew in October 1970. A Skybolt won the Reserve Grand Champion Custom Built for 1979 at the Experimental Aircraft Association airshow in Oshkosh Wisconsin.
Presented in an eye catching colour scheme this 61” span high quality balsa / ply ARTF comes factory covered in genuine gloss finish Oracover film and features a detailed cockpit, pre-painted glass fibre cowl and spats, a tough two-piece painted undercarriage, all the necessary hardware for either glow or electric power and, crucially, stunning good looks.
1023 sq. in.
Part No: 5500159
Item Name: Steen Skybolt N250SB 15cc
Brand: J Perkins
Classic Ugly Stick 10-15cc
Designed with the sports flyer in mind, the Classic Ugly Stick 71 is an aeroplane that's easy to fly and quick to assemble. The airframe is conventionally constructed from quality balsa and plywood to make it stronger than the average ARTF, while the clever design keeps the airframe surprisingly light. Most of the work has been done for you already. The pushrods are pre-made to the correct lengths, the motor mount has been fitted and the hinges are pre-installed then pinned for security. Flying the Classic Ugly Stick 71 inches is simply a joy.
With reduced control throws it makes a great choice as an aileron trainer. Increase the movements and it's capable of a wide range of aerobatics to delight the most experienced sports pilot.
Lightweight, high quality balsa and plywood construction.
Attractive, easy-to-track colour scheme.
Covered in genuine gloss finish Oracover film.
Superb flying characteristics.
Full hardware pack included for either glow or electric power.fgvbt
Needed to complete
1 x 10 - 15cc two-stroke, four-stroke or petrol.
1 x 4-ch (minimum) transmitter and receiver combo.
5 x Servos.
1 x propeller to suit chosen engine.
(sq. in): 1033.2
Part No: 5500167
Item Name: Classic Ugly Stick 10-15cc
Brand: J Perkins
J Perkins JP 480-SI Electric 48" (Zagi)
Click here to see a slideshow.
The ultimate 480 powered electric wing! Faster than a speeding bullet but easy flying for all pilots. The foam aircraft and cuitable covering tape are included in the box. You can use a Li-Po battery for up to 30 minutes flying, with stunning performance.
11.1V 2000 - 2500mAh (Rec.)
200-500W (2000-4000kv) BL or 480 Brushed (Rec.)
3 Channel (Rec.)
2 Standard (Rec.)
860g (30oz) Approx
Part No: 5500287
Item Name: J Perkins JP 480-SI Electric 48" (Zagi)
Brand: J Perkins
Seagull EP PC-9 Roulette 1.3M (SEAX8)
Without doubt these SEAGULL EP kits are remarkable to the extreme. They are not just great looking kits but have been designed to perform to the highest standards you would expect from kits that look this good! Seagull use the highest quality Balsa and Ply materials along with the lightweight yet very strong Oracover covering, gives a light but extremely rigid airframe. Use the recommended power system and you will have a great flying model that has an excellent balance of power and weight to compliment these stunning models.
2100mAh 11.1v (Req.)
C3520 1100 RPM/V (Req.)
Part No: 5500540
Item Name: Seagull EP PC-9 Roulette 1.3M (SEAX8)
Showing 31 - 40 of 263 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2017. All Rights Reserved.