Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Helicopters & Drones
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
HPI TF-40 2.4GHz Transmitter (2 Channel)
Use the comfortable and feature-packed HPI TF-40 2.4GHz radio system for supreme control and confidence when controlling your car or truck kit!The HPI TF-40 radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car! You will be able to confidently drive your HPI kit with other drivers without worrying about things like frequencies or radio conflicts. This is a fully-featured, lightweight, 3-channel radio with advanced ergonomic features and total adjustability.Set the radio up for your car with custom features like servo reversing, centre trim, end point adjustments, dual rate and more.
Only 4 AA batteries are required to power the TF-40, so it's light in your hands, and the drop-down steering wheel makes it comfortable to hole. With the adjustable, built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver.• Digital 2.4GHz technology• Run your HPI kit with other drivers without worrying about frequencies!• Adjustable built-in failsafe• 3 Channel• Drop-down steering wheel design for improved comfort and racer feel• Servo end point adjustments for steering and throttle• Servo reversing• Steering dual rate• Centre trim (steering and throttle )• Light weight (only 4 AA batteries required)• Simple switch for legal use in FranceUse with #105383 RF-40 2.4GHz receiver in RC vehicles with electronic speed controllers with BEC (Battery Eliminator Circuitry), or nitro/petrol kits that use 4 cell (6V) receiver packs.
This transmitter will not work with the RF-30 2.4GHz receiver, the RF-30 is designed for use only with the TF-20 radio.
Part No: 105381
Item Name: HPI TF-40 2.4GHz Transmitter (2 Channel)
HPI D-Box 2 Adj Stability Cntl Sys
The D-BOX 2 is the Secret Weapon for your driving and drifting!The HPI D-BOX 2 is developed for RC cars of all types - it's not just for drifters! Use the D-BOX 2 on slippery surfaces like wet paved surfaces, muddy conditions, loose dirt and wet clay tracks to give you perfect control in the turns. Simply connect the super-small D-BOX 2 between your receiver and steering servo for an amazing difference in your driving performance!This makes the D-BOX 2 perfect for nitro racers, touring car drivers, monster truck owners, bashers and more!
Perfect for Drift Drivers!
The D-BOX 2 is the perfect item to help you get long drift distances and the perfect drift angle, for a dramatic improvement to your drift driving! Just change the Sensitivity Mode Switch to help alter your car's angle through the turns!
Massively Improved over the Original D-BOX!
The D-BOX 2 is a huge improvement on the earlier ground-breaking HPI D-Box.
The original D-BOX has the capability of adjusting the gyro sensitivity. Steering response may be reduced, which will make the car more stable. In turn, it under steers when cornering.While the first generation D-BOX cannot tell if the motion is coming from the car or radio, the new D-BOX 2 has an amazing feature that improves response when the gyro sensitivity is increased (Patented steering operation priority system) using the Mode switches (see below). This new priority system allows the steering inputs from the transmitter to have priority over the gyro. While the D-BOX 2 is perfect for all types of vehicles, this gyro correction is seen the most when used in high-powered off-road cars: increasing the throttle will not spin the car out, even in slippery conditions! The D-BOX 2 will also prevent sliding in sudden braking or steering.
Exclusive Sensitivity Mode Switch
The HPI D-BOX 2 allows you to set 4 sensitivity modes using 2 switches. Mode 0 has the characteristics of the original D-BOX, with gyro compensation present from the steering action provided by your radio signal. You can get more steering control and less gyro compensation as you change the modes up to Modes 1, 2 and 3 - if you want earlier steering response through the transmitter and less from the gyro, simply change the mode to a higher number. Test drive the different modes to find the optimal driving mode for your preference!
26.5 x 27 x 10mm
Part No: 105409
Item Name: HPI D-Box 2 Adj Stability Cntl Sys
HPI TF-45/RF-45 2.4GHz Radio Set
The TF-45 has the latest Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio technology from HPI to give you total control in every situation! With favorite features like End Point Adjustment (EPA), 3rd-channel functionality, adjustable failsafe settings with the RF-45 receiver and easily adjusted settings, the TF-45 also now features customizable grips, a more ergonomic shape and drop-down steering wheel with an all-new look!2.4GHz radio frequency means you don't have to think about frequency conflicts with other RC drivers in your area - just switch on and go!
With the comfortable and lightweight TF-45 radio in your hands, you'll be able to drive, bash and race for hours!
Part No: 105424
Item Name: HPI TF-45/RF-45 2.4GHz Radio Set
HPI RM-18 21 Turn Motor (Recon)
RECON. Genuine HPI quality spare part for easy maintenance and repairs.
Part No: 105506
Item Name: HPI RM-18 21 Turn Motor (Recon)
HPI Threaded Alloy Shock Set (Front/Rear)
RECON. Add a bit of flash to your Mini-Recon with the option Threaded Aluminium Shock Set! Not only do these shocks look fantastic, anodized in gold, but you'll get extra tuning capabilities too! The threaded shock bodies will let you quickly adjust the ride height, while the aluminium construction give you smooth, predictable damping action.
Part No: 105522
Item Name: HPI Threaded Alloy Shock Set (Front/Rear)
HPI Cup Joint 5 x 10 x 15mm
Genuine HPI spare part.
Part No: 106437
Item Name: HPI Cup Joint 5 x 10 x 15mm
HPI Cup Joint 5 x 10 x 19mm
Genuine HPI spare part.
Part No: 106439
Item Name: HPI Cup Joint 5 x 10 x 19mm
HPI Universal Drive Shaft Set (2pc)
Boost the performance and durability of your Savage XS with a set of Universal Drive Shafts!Universal driveshafts offer more efficient transfer of power to the wheels, for higher speed and smoother suspension movement. These are machined from high strength steel for maximum durability, and are tougher than the stock dogbones and perfect for extreme driving conditions and wild stunts. The unique design is fully rebuildable and eliminates the set screw found on most universal dogbones, making routine maintenance easier.
These universal dog-bones are factory designed, factory manufactured and team tested for the best fit.Sold in pairs.
Part No: 106709
Item Name: HPI Universal Drive Shaft Set (2pc)
HPI Pullstart 14mm Hex (G/F Series)
Replacement part for the Nitro Star G3.0 HO Engine #107824NITRO STAR G/F SERIES/ Use with #107829 ONE WAY BEARING14mm HEX
Part No: 107828
Item Name: HPI Pullstart 14mm Hex (G/F Series)
HPI One Way Bearing 14mm Hex For Pull/Rotostart
NITRO STAR G/F SERIES/ Use with #107828 PULLSTART 14mm HEXReplacement part for the Nitro Star G3.0 HO Engine #107824
Part No: 107829
Item Name: HPI One Way Bearing 14mm Hex For Pull/Rotostart
Showing 31 - 40 of 7912 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.