Cars & Vehicles RC
On Road Cars
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Cars & Vehicles RC
On Road Cars
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Tamiya 1/10 XB Ferrari 458 (TT-01)
Tamiya have proudly released a Ready-to-Run Expert Built radio controlled model of the Ferrari 458 Challenge racing car based on the proven & beginner friendly TT-01 chassis which can be easily hopped up to improve performance. The kit has been built by Tamiya so quality is assured.This is a Read-to-Run expert built radio control model of the Ferrari 458 Challenge race car. The kit has been built by Tamiya's expert builders (XB) to ensure the beginning R/C enthusiast receives a high quality built car so they may enjoy driving it right out of the box.
Required to complete
• 7.2 Volt NiCad/NiMH Battery Pack• Charger• 8x AA Batteries
Part No: 46623
Item Name: Tamiya 1/10 XB Ferrari 458 (TT-01)
Tamiya 1/12 XB VW Van WR02
Fresh from the factory, the WR-02 chassis features a heavy-duty monocoque frame equipped with 4-wheel double wishbone suspension and a fully enclosed gearbox with differential.Like its older brother, the Wild Willy II (57743) this model is designed for high speed wheelie action, so a wheelie bar included! Sitting atop of this chassis is the new (and designed specifically for this model) VW Camper bodyshell, complete with pre-painted oversize driver figure! Radio System, Battery and Charger included!
2 Channel (Included)
Part No: 57826
Item Name: Tamiya 1/12 XB VW Van WR02
Tamiya 1/10 Fiat 500 (M-03M Chassis)
1957 saw Italian car manufacturers Fiat release the first Nuova 500 which went on to be a very popular little car. 50 years later in 2007, Fiat has enjoyed amazing success with their modern interpretation of the vehicle, the Fiat 500. The Fiat 500 was enthusiastically received by the consumer market not only in Italy but worldwide with the first production lot selling out within 3 weeks.• The Fiat 500's body is accurately reproduced with a vacuum formed polycarbonate shell.• New parts for side mirrors and wheels.
• Type 540 motor is installed on the excellent M-03M Chassis.• Front mounted motor; 2WD front wheel drive.• Tread pattern rubber tires with inner sponge included.• 4-wheel independent double-wishbone suspension with friction dampers provides excellent handling.• ESC (TEU-101BK) included.• Battery pack & charger and 2-channel R/C system separately required.
2 Channel (Req.)
Part No: 58427
Item Name: Tamiya 1/10 Fiat 500 (M-03M Chassis)
Tamiya 1/10 Mini JCW Coupe Kit
This is a Radio Control replica of the MINI JCW Coupe race car, which raced in the SP 3T class at the 39th ADAC Zurich 24 Hours of Nurburgring 2011. This car was based on the new 2-seater MINI Coupe and features race-spec modifications including a sharper windshield angle, adjustable suspension and rear wing, and a 247hp 1.6-liter four-cylinder twin-scroll turbo engine that enables a top speed of 240km/h. The Tamiya RC car is built on the popular M-05 M-Chassis platform, which is easy to build and fun to drive.• 1/10 scale R/C assembly kit.• Polycarbonate body, rear wing and light bucket cases included.• Separately-molded side mirrors are made of ABS plastic.• Body is mounted on the nimble front wheel-drive M-05 chassis with long wheelbase (239mm).• M0-5 Chassis features front wheel drive, independent double wishbone suspension with friction damper units.• Gear differential included.• Vinyl sticker sheet and masking seals for windows included.• Includes 540 motor and Tamiya TEU-104BK ESC.
Part No: 58520
Item Name: Tamiya 1/10 Mini JCW Coupe Kit
Tamiya 1/12 Lowride Pumpkin (M-06)
Get the Lowdown on a Trendy Pick-Up! In the U.S, pick-up trucks are increasingly used less for work purposes and more as personal vehicles, one prominent trend being to customize classic 1950s models. This R/C model assembly kit depicts such a classic pick-up which has been customized to make it a lowrider, and features a bulging engine hood and roll bar that ooze authenticity. Stickers are also included to add wild markings to the model.
Improved RR Performance from the M-06
The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C units positioned on either side for optimum balance and a low center of gravity.
4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. Large bumper is included.
Type 540 (Included)
Part No: 58594
Item Name: Tamiya 1/12 Lowride Pumpkin (M-06)
Tamiya Honda City Turbo
This RC model is an updated release of a Tamiya classic, which was released as "Willy's Wheeler" back in 1983. It has returned upon a newly-overhauled variant of the WR-02 chassis. It is fitted with a Honda City Turbo body, which also includes a comical driver figure. The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension.
540 Brushed (Req.)
2 Channel (Req.)
Part No: 58611
Item Name: Tamiya Honda City Turbo
Team Associated RC12R5.2 1/12 Scale Factory Team Kit
The RC12R5.2 Factory Team Kit takes the next evolutionary step in Associated's 35 years of 1:12 scale racing history.Applying what has been discovered while racing the RC12R5.1 and using the latest technologies, the RC12R5.2 was designed to further exploit every possible advantage where it counts most - on the race track.The 12R5.2 keeps the concepts that already work very well. Arguably the best 1:12 front end design to date, the I.F.M.A.R. World Championship-winning Dynamic Strut front end features symmetrical components with adjustable caster and track width.
The 12R5.2 further improves the already-proven front end by updating the lower control arms with more accurate mounting for a more precise build every time.The 12R5.2 is built on a ultra-rigid 2.5mm woven carbon fiber chassis that features a centralized LiPo battery mounting position fitting R.O.A.R.-approved 3.7V LiPo battery packs. Tyingtherear end to the chassis is the pivot-ball link rear suspension, which allows for independent adjustments for chassis roll, bump, and alignment. New for the 12R5.2 are the refined aluminum side spring retainers that provide easier and more accurate suspension adjustments.The 12R5.2's center shock uses the through-shaft design, giving equalized damping throughout the full stroke of the shock in both directions without any unwanted rebound. Roll is now controlled with the new side damper tubes that offer freer rear pod movement and easier maintenance. The 12R5.2puts this all together for a rear end that hooks up and stays hooked up throughout the imperfections of the track surface, allmaking for faster lap times.
1S 3.7V (Req.)
2 Channel (Req.)
Part No: AS4020
Item Name: Team Associated RC12R5.2 1/12 Scale Factory Team Kit
Associated Qualifier Series PR
The Qualifier Series is Team Associated's exciting line of performance sport-level products that are designed to be FUN, durable, and provide an easy path into the RC hobby. When great looks and high performance are combined with quality features and value pricing, it becomes the ultimate sport product. When all this is offered from a company like Team Associated, it's nothing short of awesome.The ProRally RTR, Team Associated's newest addition to the Qualifier Series, lets you experience the thrills of 4WD rally racing on a variety of surfaces.
From dirt to asphalt, brick and grass, the ProRally's suspension comes tuned to make the most of any surface you drive it on.The ProRally is a factory assembled AWD (all-wheel-drive) rallycross-inspired RC car based on the popular ProLite 4x4 platform. The ProRally comes Ready-To-Run out of the box and features a Reedy brushless motor, XP water resistant speed control, and high-current T-Plug Connectors. The XP 2.4GHz radio system is fully adjustable and provides reliable long distance control.• Fully assembled Ready-To-Run shaft drive 4WD rally car with your choice of two factory-finished rockstar bodies• Reedy 550-SL 3500KV brushless motor• XP 2.4GHz radio system with XP metal-gear steering servo• XP water-resistant ESC with high-current T-plug connector, LiPo compatible• Realistic rally-inspired hex drive wheels with high-grip, all-terrain tires• Durable front bumper and rear diffuser• Heavy-duty front and rear gear differentials with adjustable slipper clutch• Steel front CVA and rear dog bone axles• Fluid-filled adjustable shock absorbers• Adjustable steel turnbuckles• Composite modular chassis with enclosed water-resistant receiver box• All metric hardware and ball bearings throughout
Part No: AS7070
Item Name: Associated Qualifier Series PR
DHK Maximus 4WD GP Truck RTR
Based on the chassis and drive train layout of the Optimus GP, the Maximus GP delivers that 4WD Nitro experience in a different way and style. All the high durability metal parts are there, just the main drive ratio is changed to suit the bigger wheels. Those large wheels and high-grip spike tyres really bite on the roughest terrain that would tend to ground out a conventional buggy.Driving a 'Truck' style car is a different experience to a buggy and requires a different technique.
But then, that's half the fun!! Learning new skills to go faster is why we race cars and the Optimus GP delivers in terms of handling and speed. Add the smell and noise of nitro power and it is easy to see why it is so addictive!That class-leading .21, pull-start engine is simple to start and set, although the inexperienced would best enlist the help of their shop for that first start up and setting.DHK have rigoruusly tested the GP cars to ensure that you get performance and reliability from the first run.
.21 Class (3.5cc) (Inc.)
2 Channel 2.4GHz (Inc.)
9kg Metal Gear BB Steering, 2kg Throt/Brake (Inc.)
3,320g (7.32 lb)
Part No: C-DHK9382
Item Name: DHK Maximus 4WD GP Truck RTR
FTX Vantage 1/10th Brushless 4WD Buggy RTR with LiPo & Charger
Get ready for some serious off road buggy action with the Brushless Edition FTX Vantage. Taking RTR styling to a competition level, the Vantage brushless boasts some amazing features for the ultimate ‘Ready-to-Run' experience.Etronix provide crystal free 2.4ghz control with the EX2 Sport radio. In addition the Etronix Photon sensorless brushless system is installed to provide some low maintenance, high performance speed and power.Instead ofusing a NiMh battery, FTX decided to include a Voltz hardcase LiPo battery to get the very best from the Photon system, but with safety in-mind included is a balance charger and LiPo charge sack.
Infact all you need to add is AA batteries for the transmitter.The 4wd shaft drivetrain features metal diff gears and front universal driveshafts, while an integrated slipper helps protect the drive from possible damage. With adjustable turnbuckles all round and large bore oil filled shock absorbers the Vantage is raring to go.In addition if you want to tune and upgrade your Vantage, FTX provide a wide range of carbon and aluminium upgrades that will bring your ride up to a whole new pro level.• Ready to run• Etronix EX2 Sport 2.4ghz radio• Etronix 45Amp Photon sensorless brushless speed control• Etronix 2950KV sensorless brushless motor• Etronix Pocket Balance charger• Voltz 3250mah 7.4v 25c LiPo Hard cased battery• Voltz LiPo charge sack• Race designed low profile pre-painted bodyshell• Moulded tub chassis• 4WD shaft drive with slipper system• Unique gearbox design for low CG• Lightweight high impact arms• Big bore oil filled adjustable shocks• Gearbox metal crown & pinion gear• Front universal driveshafts• Adjustable wheelbase• Adjustable turnbuckles• Fully adjustable suspension including,droop, camber, toe-in, wheelbase etc• Slipper for drivetrain damage protection• Chassis accepts NiMh or LiPo battery• 3kg steering servo with heatsink• Wide range of option parts available
3250mah 7.4v 25c (Inc.)
2950KV Sensorless (Inc.)
EX2 Sport 2.4GHz Radio (Inc.)
45Amp Photon (Inc.)
Ready To Run
Part No: FTX5532
Item Name: FTX Vantage 1/10th Brushless 4WD Buggy RTR with LiPo & Charger
Showing 1 - 10 of 25 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2019. All Rights Reserved.