Electric Power & Accessories
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Electric Power & Accessories
Chargers & Accessories
Chris Foss ARTF
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
HPI Plazma Pouch Li-Po Safe Bag (18x22cm)
Charge your LiPo batteries with complete confidence using the HPI Plazma Pouch LiPo Safe Bag! The HPI Plazma Pouch is the ultimate protection for LiPo batteries while storing, charging or cycling your Plazma LiPo batteries or any other brand of LiPo batteries. The Plazma Pouch is flameproof and provides protection from overcharged or damaged batteries while they are being charged or stored in the Plazma Pouch.
Part No: 101289
Item Name: HPI Plazma Pouch Li-Po Safe Bag (18x22cm)
HPI Flux Rage 1:8th Scale 80Amp ESC
Fit your car or truck with the latest high-power speed controller from the HPI Flux range!The Flux Rage is a tough 1/8th scale brushless ESC that's designed to take the rigors of rallycross buggy and truggy racing and bashing. Run this speedo to its limits and it just keeps coming back for more! Have a blast with the normal forward/reverse/brake mode or switch it into race mode for maximum power - you can even use this in powerful crawling machines with the forward/reverse only mode for no braking action!Fully programmable ABS, drag brake, braking force, reverse force, motor timing and punch allows you to totally customize the feel of the Rage to your driving style and needs.
You can even use the HPI #101856 programmer to make the adjustments even easier.A low-voltage cut-off protects the battery pack, and the controller is protected by a thermostat that automatically shuts it down in the case of overheating.
Three Running modes:
• Racing (Forward and Brake only)• Forward, Reverse and Brake• Forward and Reverse (no brake) for rock crawling
Proportional ABS brake function with 4 steps of brake force adjustment, 8 steps of drag-brake force adjustment, 4 steps of initial brake force adjustment, 4 steps of reverse force adjustment, 8 steps of motor timing adjustment and 9 soft start (punch) mode settings from soft to aggressive.
Multiple protection features:
• Low voltage cut off protection for LiPo or NiMH/NiCd battery• Overheat protection for the ESCEasy programming with only one setup button, and is compatible with the pocket sized #101856 FLUX RELOAD ESC PROGRAM BOX V2
47.6 x 54.5 x 37.1mm
Max Burst Discharge:
Max. Continuous Current:
Part No: 101712
Item Name: HPI Flux Rage 1:8th Scale 80Amp ESC
HPI Plazma 6.0v 4300mAh Baja Rx Pack
5 Cell Ni-MH BAJA Hump 3+2 Receiver Pack with Tamiya Charge Plug & std Futaba Plug. Use the HPI Plazma receiver pack in any of the HPI Baja vehicles for extra-long runtime and maximum power for your servos!
Tamiya Charge Plug & Standard Futaba Plug
Part No: 101937
Item Name: HPI Plazma 6.0v 4300mAh Baja Rx Pack
HPI Fuzion 2:1 Brushless Motor/ESC 2700Kv
The HPI FLUX range has been setting the standard for ease of use, durability and performance for years, and now it's time to introduce the next step of FLUX tech: the amazing Fuzion! This is a 540-size brushless motor fitted with a powerful and convenient electronic speed control - right inside the motor case! With a smaller overall package, you get less weight, fewer wires and a much easier and neater installation - You get brushless power in a smaller and more user-friendly package!<
b>The advantages are clear:• more torque and acceleration than the standard Jumpshot motor• longer runtime thanks to FLUX brushless technology• runs more efficiently and cooler than standard motors• less weight than separate motor and speed controller• cleaner installation with fewer wires• same size as standard brushed motor
The Fuzion speed controller is also programmable so you can fine-tune it to your driving needs:
• Choose between racing-style Forward & Brake only modes or Forward, Brake and Reverse• You can set the Low Voltage Cut-Off to protect your LiPo batteries• There are 4 Start Modes for different levels of "punch" or acceleration power• The Maximum Brake Force can change the braking power for different driving surfaces• Finally, you can change the motor rotation• Designed for on-road and off-road 1/10 scale cars• Splash proof• Forward and reverse function• 4 pole brushless motor• 45A ESC• High power built-in BEC system• Easy set-up via the setup button located on the switch• Adjustable parameters• Multiple protection systems: battery low voltage cut-off, overheating, radio signal loss, stuck motor• 2S LiPo or 7-cell NiMh compatible
FLUX 540-Size Brushless (Inc.)
FLUX Brushless (Inc.)
Part No: 116195
Item Name: HPI Fuzion 2:1 Brushless Motor/ESC 2700Kv
HPI SCM-2S WaterProof ESC
Click here to see a slideshow.
The SCM-2S WP is a small and durable electronic speed controller that is suitable for Micro RC vehicles of all types! The SCM-2S WP is also fully waterproof, making it the only choice for anyone who enjoys driving their car in wet conditions.The SCM-2S WP is suitable for 5-6 NiMH cells, as well as 2S LiPo with a low voltage safety cut-off fitted to protect your LiPo batteries.
FWD Cont. / Burst Current : 25A/100A BWD Cont. / Burst Current : 25A/100A Input : 2S LiPo, 5-6 Cells NiMH / NiCd Motor Limit 2S LiPo or 6 NI-MH : 280, 370 or 380 Size Motor RPM<30000 @7.2V Resistance : Fwd 0.003O, Rev 0.003O Built-in BEC : 1A / 6V (Linear Mode) Dimension / Weight : 34x24x14mm / 23.5gNOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case).
Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
Part No: 117138
Item Name: HPI SCM-2S WaterProof ESC
Ansmann Power Jack EP Charger
Practical socket charger for transmitter, receiver and battery from Ansmann.Charging current for transmitter battery with 9.6V: 80 mACharging current for receiver battery with 4.8V: 80 mACharging current for driving battery with 7.2 V: 170 mA
Part No: 152000040
Item Name: Ansmann Power Jack EP Charger
Ansmann Power Jack 6-8 Cell Charger
Part No: 152100002
Item Name: Ansmann Power Jack 6-8 Cell Charger
LiPo Safety Charge Sack
Lipo Safety Sack For use when charging lipo batteries size 23cm x 30cm It is well known that we need to be a little more careful with our battery handling and with LiPo?s Overlander wants to help keep you safe with our LiPo Safety Sack. We have sacks for your battery storing and charging needs. If you have made the jump to LiPo, you should probably consider grabbing a few sacks for yourself. Ideal for storage of the lipos and then also invaluable for charging. Mark Barnes said "Inva
luable for charging and storing Lipos, we have all seen and heard the horror stories, this gives me peace of mind"
230 x 300mm
Part No: 153
Item Name: LiPo Safety Charge Sack
Sanyo 1000mAh Cell 1.2v MPX
Sanyo 1000mAh Cell 1.2v MPX
Part No: 155504
Item Name: Sanyo 1000mAh Cell 1.2v MPX
Multiplex 156031 6Cell 1400mAh NiMh Pk
With TAMIYA style connector.
Part No: 156031
Item Name: Multiplex 156031 6Cell 1400mAh NiMh Pk
Showing 1 - 10 of 837 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.