Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Chris Foss ARTF
Jet Sport Models
Super Flying Model
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Skyraider Warbird (Tiger) 10cc
Seagull’s passion to deliver aeroplanes that both excite and enthuse is exemplified in this traditional balsa and ply ARTF, inspired by the Douglas A-1 Skyraider single seat attack aircraft. Decorated in the colours of a French Air Force Skyraider based at Boufarik, Algeria, in July 1960, Seagull’s model features pre-built and pre-covered fuselage, wing and tail assemblies, pre-installed hinges throughout, and a neatly painted glass fibre cowl, the whole designed to make light work of the basic assembly process.
As with all Seagull kits this one comes beautifully wrapped in Oracover heat-shrink film sporting a realistic satin finish, appropriate decals and a host of desirable scale features, such as dummy radial engine detail, flaps, a pilot, and a full complement of bombs and missiles.Being a scale model and a warbird it’ll come as no surprise that the Skyraider is not for beginners, however if you’re a confident and competent intermediate or advanced pilot you’ll just love its flight stability and surprising aerobatic capability. Suitable for 10 - 15cc internal combustion engines – or equivalent electric power – and 5-channel radio (7 servos), the Seagull Skyraider builds into a shining example of the imposing full-size and, since you'll not have seen many of these at the flying field, has tremendous appeal.
10 - 15cc
637 sq. in.
Part No: 5500155
Item Name: Skyraider Warbird (Tiger) 10cc
Steen Skybolt N250SB 15cc
The Steen Skybolt is an American home-built aerobatic biplane. Originally designed by Lamar Steen as an engineering project, the prototype first flew in October 1970. A Skybolt won the Reserve Grand Champion Custom Built for 1979 at the Experimental Aircraft Association airshow in Oshkosh Wisconsin.Presented in an eye catching colour scheme this 61” span high quality balsa / ply ARTF comes factory covered in genuine gloss finish Oracover film and features a detailed cockpit, pre-painted glass fibre cowl and spats, a tough two-piece painted undercarriage, all the necessary hardware for either glow or electric power and, crucially, stunning good looks.
1023 sq. in.
Part No: 5500159
Item Name: Steen Skybolt N250SB 15cc
Classic Ugly Stick 10-15cc
Designed with the sports flyer in mind, the Classic Ugly Stick 71 is an aeroplane that's easy to fly and quick to assemble. The airframe is conventionally constructed from quality balsa and plywood to make it stronger than the average ARTF, while the clever design keeps the airframe surprisingly light. Most of the work has been done for you already. The pushrods are pre-made to the correct lengths, the motor mount has been fitted and the hinges are pre-installed then pinned for security. Flying the Classic Ugly Stick 71 inches is simply a joy.
With reduced control throws it makes a great choice as an aileron trainer. Increase the movements and it's capable of a wide range of aerobatics to delight the most experienced sports pilot.
Lightweight, high quality balsa and plywood construction.
Attractive, easy-to-track colour scheme.
Covered in genuine gloss finish Oracover film.
Superb flying characteristics.
Full hardware pack included for either glow or electric power.fgvbt
Needed to complete
1 x 10 - 15cc two-stroke, four-stroke or petrol.
1 x 4-ch (minimum) transmitter and receiver combo.
5 x Servos.
1 x propeller to suit chosen engine.
(sq. in): 1033.2
Part No: 5500167
Item Name: Classic Ugly Stick 10-15cc
J Perkins Zagi-SI 48" JP
Bucket loads of fun with fantastic flying for beginners or experts. An utterly outrageous flying wing requiring just two standard servos and a JP Elevon V/tail mixer (JP part no. 4460520). Fiendishly cunning construction features unbustable EPP combined with moulded foam for stonking durability and blinding speed of assembly (approx.3 hours). Dazzlingly coloured roll of covering tape is included. When covered with optional fibreglass reinforced Bullet tape, the model is almost unbreakable. Fly it from the slope in the tiniest zephyr of a breeze or in a howling hooly hurricane.
Additional items may be required to complete this model. If you require further information please contact us for assistance.
2 Ch. (W/Delta Mixing)
Part No: 5500285
Item Name: J Perkins Zagi-SI 48" JP
J Perkins JP 480-SI Electric 48" (Zagi)
The ultimate 480 powered electric wing! Faster than a speeding bullet but easy flying for all pilots. The foam aircraft and cuitable covering tape are included in the box. You can use a Li-Po battery for up to 30 minutes flying, with stunning performance.This is the aircraft only and no electronics are included.
11.1V 2000 - 2500mAh (Rec.)
200-500W (2000-4000kv) BL or 480 Brushed (Rec.)
3 Channel (Rec.)
2 Standard (Rec.)
860g (30oz) Approx
Part No: 5500287
Item Name: J Perkins JP 480-SI Electric 48" (Zagi)
JP Panic 3D/Sport Biplane (CNC Kit)
Having fun never goes out of fashion and neither does the Panic bipe. In the late ‘70s a group of competition pilots were flying a fantastic new biplane designed by the late Phil Newman. They got together after fun-fly competitions to put on the most amazing displays of aerial dancing the like of which had never been witnessed before. That bipe was known as the Panic and the rest, as they say, is history.This new, revised kit from J.Perkins is bang up-to-date with laser-cut parts, pre-formed u/c, an interlocking wing construction and full instructions.
It builds quickly and accurately and suits a .52 four-stroke, .60-.91 two-stroke or electric power and requires 4 or 5 standard size servos.Panic is for everyone; whether you’re an experienced stick-banger, or relatively new and looking for your first aerobat. With a .60-size engine and low rates it’s friendly and fun, but insanely lively with a larger engine and huge control surface deflections. Just make sure you select your servos accordingly. We’d suggest Hitec HS635HBs for intermediate pilots and HS5625MGs for experts. • A true all-time classic• Traditional ‘quick-build’ kit• Lightweight, high quality balsa and plywood construction• Laser-cut parts including ribs, lightening holes and wing sheeting cut to size• Simplified interlocking wing construction• One-piece pre-lightened tail surfaces• Pre-formed wire undercarriage• Suits a wide range of engine sizes• Easily converted for electric power
What's in the Box
• Laser-cut balsa and plywood parts• Wire undercarriage parts ready for soldering• Saddle clamps and screws for undercarriage• 8x Wing tip 19mm press studs• 1x Engine mount• 1x Full instruction manual
.60-.91 Two-Stroke (Req.)
.52 Four-Stroke (Req.)
4-5 Channel (Req.)
5 Standard (Req.)
Part No: JPDAA1000
Item Name: JP Panic 3D/Sport Biplane (CNC Kit)
Showing 1 - 6 of 6 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2019. All Rights Reserved.