Cars & Vehicles RC
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Cars & Vehicles RC
Off Road Cars
On Road Cars
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Tamiya 1/10 XB Ferrari 458 (TT-01)
Tamiya have proudly released a Ready-to-Run Expert Built radio controlled model of the Ferrari 458 Challenge racing car based on the proven & beginner friendly TT-01 chassis which can be easily hopped up to improve performance. The kit has been built by Tamiya so quality is assured.This is a Read-to-Run expert built radio control model of the Ferrari 458 Challenge race car. The kit has been built by Tamiya's expert builders (XB) to ensure the beginning R/C enthusiast receives a high quality built car so they may enjoy driving it right out of the box.
Required to complete
• 7.2 Volt NiCad/NiMH Battery Pack• Charger• 8x AA Batteries
Part No: 46623
Item Name: Tamiya 1/10 XB Ferrari 458 (TT-01)
Tamiya 1/12 XB VW Van WR02
Fresh from the factory, the WR-02 chassis features a heavy-duty monocoque frame equipped with 4-wheel double wishbone suspension and a fully enclosed gearbox with differential.Like its older brother, the Wild Willy II (57743) this model is designed for high speed wheelie action, so a wheelie bar included! Sitting atop of this chassis is the new (and designed specifically for this model) VW Camper bodyshell, complete with pre-painted oversize driver figure! Radio System, Battery and Charger included!
2 Channel (Included)
Part No: 57826
Item Name: Tamiya 1/12 XB VW Van WR02
Tamiya 1/10 Fiat 500 (M-03M Chassis)
1957 saw Italian car manufacturers Fiat release the first Nuova 500 which went on to be a very popular little car. 50 years later in 2007, Fiat has enjoyed amazing success with their modern interpretation of the vehicle, the Fiat 500. The Fiat 500 was enthusiastically received by the consumer market not only in Italy but worldwide with the first production lot selling out within 3 weeks.• The Fiat 500's body is accurately reproduced with a vacuum formed polycarbonate shell.• New parts for side mirrors and wheels.
• Type 540 motor is installed on the excellent M-03M Chassis.• Front mounted motor; 2WD front wheel drive.• Tread pattern rubber tires with inner sponge included.• 4-wheel independent double-wishbone suspension with friction dampers provides excellent handling.• ESC (TEU-101BK) included.• Battery pack & charger and 2-channel R/C system separately required.
2 Channel (Req.)
Part No: 58427
Item Name: Tamiya 1/10 Fiat 500 (M-03M Chassis)
Tamiya 1/10 Blitzer Beetle Kit
This is a re-release version of the Blitzer Beetle R/C assembly kit, which was inspired by the exciting off-road desert racer designs seen in the United States. The durable resin body is molded in white and comes with side mirror parts. The body may be painted with Tamiya's TS spray paints, which are formulated in synthetic lacquer for the best finish and durability.• The tough, lightweight ABS bathtub chassis features a rear-mounted motor, rear-wheel drive layout.• 4-wheel independent double wishbone suspension is equipped with C.V.A.
oil filled shock units and extremely durable monocoque-type lower arms.• The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high levels of grip.• Fully-enclosed gearbox protects against dirt and debris.• Driver figure included for increased scale realism
2 Channel (Req.)
Part No: 58502
Item Name: Tamiya 1/10 Blitzer Beetle Kit
Tamiya 1/10 Mini JCW Coupe Kit
This is a Radio Control replica of the MINI JCW Coupe race car, which raced in the SP 3T class at the 39th ADAC Zurich 24 Hours of Nurburgring 2011. This car was based on the new 2-seater MINI Coupe and features race-spec modifications including a sharper windshield angle, adjustable suspension and rear wing, and a 247hp 1.6-liter four-cylinder twin-scroll turbo engine that enables a top speed of 240km/h. The Tamiya RC car is built on the popular M-05 M-Chassis platform, which is easy to build and fun to drive.• 1/10 scale R/C assembly kit.• Polycarbonate body, rear wing and light bucket cases included.• Separately-molded side mirrors are made of ABS plastic.• Body is mounted on the nimble front wheel-drive M-05 chassis with long wheelbase (239mm).• M0-5 Chassis features front wheel drive, independent double wishbone suspension with friction damper units.• Gear differential included.• Vinyl sticker sheet and masking seals for windows included.• Includes 540 motor and Tamiya TEU-104BK ESC.
Part No: 58520
Item Name: Tamiya 1/10 Mini JCW Coupe Kit
Tamiya 1/12 Suzuki Jimney Wheelie
The Suzuki Jimny was a popular compact SUV which was also known as the Suzuki Samurai, Suzuki Katana, etc. outside of Japan, was first introduced in the early 1970s. The vehicle featured ladder frame construction and a rigid axle suspension for off-road performance. Tamiya's R/C assembly kit depicts the 2nd generation SJ30 variant, released in 1981, on the fun WR-02 chassis.The distinctive form of the little SUV is reproduced in polycarbonate and an injection-molded driver figure is also included.
Rear-wheel drive WR-02 chassis is designed with a wheelie bar to enable fun, wheels in the air driving.
Part No: 58531
Item Name: Tamiya 1/12 Suzuki Jimney Wheelie
Tamiya R/C Asterion XV-01T Kit
The XV-01 chassis was designed to be a crossover platform. The Asterion is the first truck to be released on the XV-01 pick-up truck variant! Modifications such as large diameter tires, a special bumper, and long oil dampers help offer dynamic racing truck action on any type of track surface.
• Construction type: assembly kit • Terrain use: multi-purpose • Drive-train: 2WD RWD • Drive type: gearbox • Drive line: dog bone • Differential type: gear • Suspension: independent front/solid axle rear • Steering mechanism: direct servo • Shock damper: friction damper • Shock damper material: plastic • Tire type: rubber • Tire tread: chevron • Body material: ABS Plastic • ESC: included • ESC type: TEU-105BK • LED Light buckets: no • LED lights: no • Motor type: 540-brushed type • Bearings: plastic bushing • Chassis material: plastic • Sticker material: vinyl • Internal gear ratio: • Adjustable camber: fixed • Adjustable toe angles: front only • Adjustable ride height: fixed • Adjustable gear ratio: fixed • Adjustable wheelbase: fixed • Adjustable track width: fixed • Adjustable shock angle: fixed • Special features: Black ABS molded body
2 battery & charger • Radio gear, servo, receiver • TS synthetic lacquer paint for ABS
Full Ball Bearings (Included)
Part No: 58552
Item Name: Tamiya R/C Asterion XV-01T Kit
Tamiya 1/12 Lowride Pumpkin (M-06)
Get the Lowdown on a Trendy Pick-Up! In the U.S, pick-up trucks are increasingly used less for work purposes and more as personal vehicles, one prominent trend being to customize classic 1950s models. This R/C model assembly kit depicts such a classic pick-up which has been customized to make it a lowrider, and features a bulging engine hood and roll bar that ooze authenticity. Stickers are also included to add wild markings to the model.
Improved RR Performance from the M-06
The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C units positioned on either side for optimum balance and a low center of gravity.
4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. Large bumper is included.
Type 540 (Included)
Part No: 58594
Item Name: Tamiya 1/12 Lowride Pumpkin (M-06)
Tamiya Honda City Turbo
This RC model is an updated release of a Tamiya classic, which was released as "Willy's Wheeler" back in 1983. It has returned upon a newly-overhauled variant of the WR-02 chassis. It is fitted with a Honda City Turbo body, which also includes a comical driver figure. The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension.
540 Brushed (Req.)
2 Channel (Req.)
Part No: 58611
Item Name: Tamiya Honda City Turbo
Showing 1 - 9 of 9 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2019. All Rights Reserved.