| | Small servo mounting hardware. 60 pieces, enough for 5 servos. 20 sheet metal screws, 20 flat washers, 20 spacers. | | Part No: F-DB114 Item Name: Dubro Small Servo Mounting Hardware Brand: Du-Bro
| | |
|
| | Adjustable, spring action assembly protects servo from shock and stalling. Excellent for throttle or rudder nose wheel hookups. A light and heavy duty spring is included for .072 diameter control rods. 11 part set.Made in USA | | Part No: F-DB120 Item Name: Dubro Control Over-Ride Servo Saver Brand: Du-Bro
| | |
|
| | Comes with washer permanently attached to screw so you can't lose it. Screw size: #2 X 7/16". | | Part No: F-DB893 Item Name: Dubro Socket Head Servo Mounting Screws Brand: Du-Bro
| | |
|
| | A versatile servo mounting system for any micro servo. These super lightweight, durable servo mounts work on foam, wood, etc. Servo mounts can be installed by drilling a small hole and using CA (cyanoacrylate). The servo can then be mounted using double-sided tape (provided) or screws (provided) for a permanent mount.Servo mounts are made of ABS plastic and are secured with locking back plates. Package contains mount sets for two servos.Made in USA | | Part No: F-DB924 Item Name: Dubro Micro Servo Mount Brand: Du-Bro
| | |
|
| | The E/Z Mount Cowl System provides an easy method of mounting your cowl. It's shock absorbing bushings will also reduce vibration and protect your painted surface from being marred. The E/Z Mount Cowl System is also adjustable and comes complete with all the hardware needed.Made in USA | | Part No: F-DB998 Item Name: Dubro E/Z Mount Cowl System .20-.90 Size Aircraft Brand: Du-Bro
| | |
|
| | The E/Z Mount Cowl System provides an easy method of mounting your cowl. It's shock absorbing bushings will also reduce vibration and protect your painted surface from being marred. The E/Z Mount Cowl System is also adjustable and comes complete with all the hardware needed.Made in USA | | Part No: F-DB999 Item Name: Dubro E/Z Mount Cowl System .90 & Above Size Aircraft Brand: Du-Bro
| | |
|
| | Mounting bracket is adaptable to fit both small and large radio switches. This complete switch mounting set enables you to install your battery switch in minutes, anywhere in the fuselage, by drilling one 3/16" hole! Excellent for use in planes, helicopters, boats, and cars. This attractive, black nylon switch mount is adaptable to any wall thickness up to 3/8" (9.5mm).Made in USA | | Part No: P-DB203 Item Name: Dubro Kwik Switch Mount without Charging Jack Brand: Du-Bro
| | |
|
| | Mounting bracket is adaptable to fit both small and large radio switches. This complete switch mounting set enables you to install your battery switch in minutes, anywhere in the fuselage, by drilling one 3/16" hole! Excellent for use in planes, helicopters, boats, and cars. This attractive, black nylon switch mount is adaptable to any wall thickness up to 3/8" (9.5mm).Du-Bro's Kwik-Switch & Charging Jack offers a clean and simple way to mount receiver battery switches and charging plugs. Designed to mount on any aircraft fuselage within minutes, the Kwik-Switch & Charging Jack uses one single set screw to lock the charging plug into place. This system is universal and will fit all radio systems!Made in USA
| | Part No: P-DB207 Item Name: Dubro Kwik Switch Mount with Charging Jack Brand: Du-Bro
| | |
|
| | A Futaba servo arm for the pull-pull in large aircraft. This dual arm design allows for straight in-line movement.This super strong full arm includes 4-40 swivel ball links and hardware. There are four mounting positions and they are made from glass filled nylon for more strength.Dimension from center to the end mounting hole is: 1.5645" (39.75 mm)Made in USA | | Part No: P-DB3344 Item Name: Dubro Full Dual Servo Arm Futaba Brand: Du-Bro
| | |
|
| | A JR servo arm for the pull-pull in large aircraft. This dual arm design allows for straight in-line movement.This super strong full arm includes 4-40 swivel ball links and hardware. There are four mounting positions and they are made from glass filled nylon for more strength.Dimension from center to the end mounting hole is: 1.5645" (39.75 mm)Made in USA | | Part No: P-DB3345 Item Name: Dubro Full Dual Servo Arm JR Servos Brand: Du-Bro
| | |
|
|