Radio & Accessories
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Radio & Accessories
Switches & Leads
Transmitters & Systems
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
HPI TF-20E 2.4GHz Transmitter (2-Channel)
As an upgrade to your AM or FM radio transmitter, or just as a spare replacement for your Baja buggy or truck 2.4GHz radio, the HPI TF-20E is the perfect 2-channel addition to your RC arsenal!This is a fully-featured radio, with DSSS (Direct-Sequene Spread Spectrum) technology for no-crystal, no-fuss driving enjoyment. You can just switch on the radio and not have to worry about what channel anyone else is running - just get out and drive!
Other spare radio parts for the Baja 2.
4GHz models include:#104060 - HPI RF-30 RECEIVER (2.4GHz / 2ch / 6V 5cell Battery)#104085 - 2.4GHz RECEIVER ANTENNA 300mm
Part No: 104058
Item Name: HPI TF-20E 2.4GHz Transmitter (2-Channel)
HPI TF-40 2.4GHz Transmitter (2 Channel)
Use the comfortable and feature-packed HPI TF-40 2.4GHz radio system for supreme control and confidence when controlling your car or truck kit!The HPI TF-40 radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car! You will be able to confidently drive your HPI kit with other drivers without worrying about things like frequencies or radio conflicts. This is a fully-featured, lightweight, 3-channel radio with advanced ergonomic features and total adjustability.Set the radio up for your car with custom features like servo reversing, centre trim, end point adjustments, dual rate and more.
Only 4 AA batteries are required to power the TF-40, so it's light in your hands, and the drop-down steering wheel makes it comfortable to hole. With the adjustable, built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver.• Digital 2.4GHz technology• Run your HPI kit with other drivers without worrying about frequencies!• Adjustable built-in failsafe• 3 Channel• Drop-down steering wheel design for improved comfort and racer feel• Servo end point adjustments for steering and throttle• Servo reversing• Steering dual rate• Centre trim (steering and throttle )• Light weight (only 4 AA batteries required)• Simple switch for legal use in FranceUse with #105383 RF-40 2.4GHz receiver in RC vehicles with electronic speed controllers with BEC (Battery Eliminator Circuitry), or nitro/petrol kits that use 4 cell (6V) receiver packs.
This transmitter will not work with the RF-30 2.4GHz receiver, the RF-30 is designed for use only with the TF-20 radio.
Part No: 105381
Item Name: HPI TF-40 2.4GHz Transmitter (2 Channel)
HPI RF-45 RECEIVER (2.4GHZ/3CH)
The RF-45 receiver is the perfect size to fit in any RC car or truck. Its tiny size is just 33x26mm and only 13mm high, and its extremely light weight of just 8 grams means it won't affect the weight balance, no matter where it's installed. Its short antenna means you can hide it underneath just about any RC body for a realistic 'stealth' look! The RF-45 receiver has been designed with nitro and gas vehicles in mind. It has a convenient battery type switch that sets the low voltage failsafe cut-off limit.
If you're using the radio system in a nitro or gas vehicle equipped with a LiPo receiver battery, just put the switch in the LiPo position. Some nitro vehicle owners use 6v NiMH 5-cell packs (commonly known as 'hump' packs), in this case put the switch in the NiMH position.Using Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio technology, the RF-45 works with any TF-40 or TF-45 radio via a simple and quick binding procedure to give you a secure, reliable connection at all times. Should the radio link ever fail for some reason, the radio will instantly switch the throttle channel to its failsafe position, which you can set to full brake for a nitro vehicle. HPI RTR vehicles already have the failsafe position set from the factory.If you want to use the TF-45 transmitter with an electric vehicle, then simply pair the TF-45 with an RF-40 receiver instead of the RF-45.
RF-45 Receiver Features:
• Small size fits nearly anywhere• Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio technology• Simple binding to the TF-45 transmitter• Adjustable failsafe settings• Battery type switch (7.4v LiPo or 6v NiMH)• 3rd channel plug can be used to control lights, winch, etc., or power a personal transponder• Just 33x26x13mm in size• Extremely light weight (8g)• Note: the RF-45 should not be used with alkaline or other non-rechargeable batteries
light weight (8g)
Part No: 105422
Item Name: HPI RF-45 RECEIVER (2.4GHZ/3CH)
Showing 1 - 3 of 3 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.