Radio & Accessories
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Radio & Accessories
Switches & Leads
Transmitters & Systems
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Robbe Volt Detector 4/5 NiMH or 2/3S LiPo
Part No: A-2082
Item Name: Robbe Volt Detector 4/5 NiMH or 2/3S LiPo
Robbe FASST Telemetry Display Box
Data output takes the form of:A large backlit screenSound output via beeper or earphoneSpeech output via earphone, initially in German and EnglishVibration alarmThe unit's power supply is a rechargeable LiPo battery which can be recharged from any 12 V power source using the charge lead supplied in the set. The user himself can update the device himself at any time using the integral USB socket. The sensor configuration process operates in the same manner as the T-18MZ, using the S.BUS socket.
Adapters included in the set can be used to attach the Telemetry-Box to hand-held and tray-mounted transmitters.The Telemetry-Box can pick up signals from all receivers with an integral telemetry transmitter.For example: from R7008SB and R6308SBT receivers.The Telemetry-Box is suitable both for converting existing FASST systems to telemetry (R6308SBT required at the model end). And as a parallel display and output device for caller and co-pilot when used with a FASSTest telemetry system.
Part No: F1666
Item Name: Robbe FASST Telemetry Display Box
Robbe FASST Telemetry Wi-Fi Rx Box
These data are transmitted to your smart-phone - iPhone or Android - via WLAN.There the data output takes the form of :On-screen displaySound outputSpeech outputVibration alarmThe Wi-Fi Box draws power from the transmitter's Trainer socket.Software (App) for the IPhone or Android is in preparation.The Wi-Fi-Box is capable of receiving the signals of all receivers with an integral telemetry transmitter. For example, by the R7008SB or R6308SBT receiver.The Box, used in conjunction with a smart-phone, is suitable for upgrading an existing FASST system to telemetry (R6308SBT required at the model end).
and also as a parallel display and output device for caller and co-pilot when used with a FASSTest telemetry system.
Part No: F1667
Item Name: Robbe FASST Telemetry Wi-Fi Rx Box
Robbe Vario/Altitude Sensor (TEK)
With its small dimensions and a weight of only 5.5 g is is likely that the robbe TEK precision vario and altimeter is currently the world's smallest, lightest and most accurate sensor (with dual TEK sensor). The individual robbe-Futaba sensor ID automatically configures the sequence and display unit when the sensor is registered (to the transmitter or the Telemetry-Box).Features of the vario-altimeter sensor:High sensitivity of 2 cm/s makes it possible to exploit very weak thermal lift.
The system indicates even the slightest sign of the model climbing.The TEK socket makes it possible to compensate for "stick-generated thermals". The result is that speed changes have hardly any effect on the vario sound and speech output.The second supplementary pressure sensor provides accurate altitude monitoring, in spite of the variometer's TEK compensation, which produces a further improvement in sensitivity.This variometer is naturally height-compensated (a 1 mBar change of pressure at sea-level corresponds to a different rate of climb at an altitude of 3000 m )Pressure is converted in accordance with standard ICAO atmosphere with an accuracy of 1 mThe TEK vario / altimeter is particularly good at rejecting interference from 2.4 GHz telemetry transmitters.Update facility via USB, i.e. software updates and future developments can be installed by the userPressure element mounted on a ceramic substrate for extremely low pressure sensor drift due to temperature and protracted usage.SpecificationVario measurement range: -300 m/s …+300 m/sVario resolution: = 2 cm/sAltitude measurement: -1000 m ... +9000 mAltitude resolution: 1 mDimensions: approx. 37.5 x 22.5 x 9.3 mmWeight: approx. 6.5 gOperating voltage: 3.6 ... 8.4 VCurrent drain: approx. 5 mA
Part No: F1672
Item Name: Robbe Vario/Altitude Sensor (TEK)
Robbe TEK Vario Compensation Kit
Part No: F1673
Item Name: Robbe TEK Vario Compensation Kit
Robbe GPS Multi Sensor
Compact GPS and vario sensor including altitude measurement, for connecting to the S.BUS2 socket of a telemetry receiver.Specification:Vario measurement range: -50 m/s …+50 m/sVario resolution: approx. 10 cm/sAltitude measurement: -500 m ... +3000 mAltitude measurement resolution: 1 mSpeed measurement: 0 ... 500 km/htDistance measurement: 0 ... 3000 mDimensions: approx. 45 x 30 x 15 mmWeight: approx. 21 gOperating voltage: 3.6 ... 8.
4 VCurrent drain approx.: 114 mA
Part No: F1675
Item Name: Robbe GPS Multi Sensor
Robbe Vario/Altitude Sensor
Small, light, low-cost vario / altimeter for the FASSTest telemetry system. The individual robbe-Futaba sensor ID automatically configures the sequence and display unit when the sensor is registered (to the transmitter or to the Telemetry-Box).Output options:Sound signal output with five signal tones for climb and sinkTwo-stage warning threshold for climb and sink rateTwo-stage warning threshold for minimum and maximum altitudeDisplay and storing of minimum and maximum altitudeUser-variable alarm time: off, 5…30 sec., always onUser-variable alarm repeat time: always on, 1… 5 x per min, 1 xSpecification:Vario measurement range: -50 m/s …+50 m/sVario resolution: approx.
10 cm/sAltitude measurement: -500 m ... +3000 mAltitude measurement resolution: 1mDimensions approx. 30 x 14 x 8 mmWeight approx. 5.5 gOperating voltage 3.6 ... 8.4 VCurrent drain: approx. 30 mA
Part No: F1712
Item Name: Robbe Vario/Altitude Sensor
Robbe Temp Sensor (-20/125Deg C)
Temperature sensor, 125°C, for the FASSTest telemetry system. The individual robbe-Futaba sensor ID automatically configures the sequence and display unit when the sensor is registered (to the transmitter or to the Telemetry-Box). Temperature range: -20…125°C
Part No: F1713
Item Name: Robbe Temp Sensor (-20/125Deg C)
Showing 1 - 8 of 8 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.