Electric Power & Accessories
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Electric Power & Accessories
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
30Amp Pro Switch-Mode BEC Brushless ESC (V2)
Part No: EFLA1030B
Item Name: 30Amp Pro Switch-Mode BEC Brushless ESC (V2)
40Amp Pro Switch-Mode BEC Brushless ESC (V2)
Part No: EFLA1040B
Item Name: 40Amp Pro Switch-Mode BEC Brushless ESC (V2)
40Amp Lite Pro Switch-Mode BEC Brushless ESC V2
Part No: EFLA1040LB
Item Name: 40Amp Lite Pro Switch-Mode BEC Brushless ESC V2
E-flite 60Amp ESC v2
The E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. • Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds) • 5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required) • Stronger BEC for support of most 3-axis stabilization systems • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage • Finned heat sinks • Programmable motor braking • Safe power-arm mode prevents accidental starts • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage • Programmable throttle input range (1.
1ms–1.9ms or 1.2ms–1.8ms) • Programmable soft start for helis and airplanes • Auto motor shut down if signal is lost or there is interference • Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors • Utilizes new smaller MOSFET technology to minimize weight • Radio system power on/off switch • Pre-wired connectors—E-flite EC3 connector on battery input and 3.5mm gold bullet connectors on motor output leads
3 - 6S
9 - 18 Ni-MH
73 x 33 x 15.5mm
Part No: EFLA1060B
Item Name: E-flite 60Amp ESC v2
E-Flite 80 Amp Pro Switch-Mode BEC ESC
When performance matters in your high-current applications look no further than the E-flite 80-Amp Pro Switch Mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated Switch-Mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage.
Featuring an exposed, finned heat sink aluminum case with lightweight plastic endcaps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range, and more, the E-flite 80-Amp Pro Switch Mode ESC is truly a ‘pro series’ electronic speed control.
Max. Peak Current:
Part No: EFLA1080B
Item Name: E-Flite 80 Amp Pro Switch-Mode BEC ESC
Showing 1 - 5 of 5 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2019. All Rights Reserved.