Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Balancers & Gauges
Knives & Blades
Power Tool Accessories
Sanding & Grinding
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Incidence Gauge Multiplex
If a model is to fly satisfactorily its Centre of Gravity and its longitudinal dihedral must both be correct. Inaccurate incidence settings can lead to innumerable unnecessary test-flights or - in the worst case - to an immediate crash.
With the Incidence Gauge you can avoid this uncertainty on the first flight. The prism or measuring mandrel can be used to check the incidence of:
• Severely cambered airfoils (mandrel avoids measurement error)
• T-tail, cross-tail
• V-tail (swivelling prisms)
The following useful measurements are also possible:
• rotor blade pitch (model helicopters)
• motor downthrust (glow and electric motors)
• wing washout (or warps)
• take-off angle of attack (wheel position)
• simple to assemble and use
An essential tool for any serious aeromodeller.
Part No: 693053
Item Name: Incidence Gauge Multiplex
C of G Gauge Multiplex
Don't guess the balance point, or use fingertips to measure it when you can use a simple, accurate tool like this! If a model is to fly satisfactorily its longitudinal dihedral must be correct, and its flying surfaces warp-free. The final factor is that its CG must also be right. Guessing the balance point, e.g. using your fingertips, can lead to innumerable unnecessary test-flights or - in the worst case - to an immediate crash.
The plan or building instructions usually state the CG position, but how should it be transferred accurately to the model? This problem is solved neatly with this CG Gauge, which is designed to cope with models with an all-up weight of 300 g to 10 kg.
The measurement range extends from 30 to 150 mm, which means that it can handle a (non-swept) wing with a chord of up to about 450 mm in the case of a constant-chord wing.
Part No: 693054
Item Name: C of G Gauge Multiplex
Showing 1 - 2 of 2 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2017. All Rights Reserved.