Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Chris Foss ARTF
Super Flying Model
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
RR Dogfighter SR w/BL Motor
...3 ...2 ...1 Lets RACE! The DogFighter SR is the ideal model for club races, dogfights season or flights with colleagues. He has tremendous speed range and always remains safe and comfortable to control. The SR is built, supplied painted and decorated. With the attractive, green racing decor, the model of the mass takes off and is also on the ground a show.
RR DogFighter SR
ELAPOR model, 95% factory-built, including HIMAX C3516-1130 motor, MULTIcont BL-40 S-BEC speed
controller, 10 x 7" propeller, 3 x Nano-S servo, decals applied, comprehensive instructions• Spectacular top speed• Very neutral flying characteristics, accurate response to control commands for precise aerobatics• Factory-painted, decals applied• Detachable wing for ease of transport• Convenient battery swap through the canopy• High-performance BL motor, speed controller, elevator and aileron servos already installed• Extremely accurate adjustment of downthrust and sidethrust• Rudder function can be retro-fitted in just a few minutes; all parts (apart from servo) included• Highly pre-fabricated: install the tailplane and receiver, go fly
Part No: 25264251
Item Name: RR Dogfighter SR w/BL Motor
Multiplex Extra RR SC Limited Edition
A practical, unlimited, performance, 3D and pattern aerobat with World Championship pedigree and Multiplex unrivalled qualityWhat do you get if you mix F3P World Champion Gernot Bruckmann with the internationally successful Extra Aircraft Company and the talents of the Mirco Pecorari design studio? Answer: An aerobatic model aircraft that’s been tailor-made for pilots who know what they want, know how to fly, and desire the very best 3D performance that it’s possible to get from a stunning out-and-out pattern and freestyle aerobat.
That model is the Extra 330SC and if you add Multiplex’ world-class design and manufacturing experience to the heady mix of talent, the package is further enhanced by a powerful and extremely solid Elapor airframe that sets new standards in the 1.2m class. It’s versatile too, and with exceptional longitudinal stability, very precise, conventional, F3A-style aerobatics are a joy to perform. This, then, is a model you’ll instantly fall in love with and one whose secrets will make you look so good, youll be reluctant to share them.• Designed by Gernot Bruckmann.• Rigid M-Frame fuselage construction.• Stiff carbon tube wing spar and coiled CFRP joiner.• Two piece plug-in wing panels for easy transport and storage.• Moulded in robust ELAPOR foam.• Tough carbon fibre undercarriage.• Removeable canopy hatch for convenient battery access.• Hitec HS-82MG metal gear servos.• Powerful Permax BL-O 3520-0920 brushless motor.• Suits a 3S 2600mAh LiPo.• 15 minute assembly time.• Pilot figure with colour-coordinated flying suit.
11.1V 3S 2600mAh (Req.)
Permax BL-O 3520-0920 Brushless (Inc.)
14 x 7 APC-E (Inc.)
5 Channel (Req.)
4x Hitec HS-82 MG (Inc.)
MULTIcont BL-55 S-BEC (Inc.)
Part No: 25264274
Item Name: Multiplex Extra RR SC Limited Edition
Kit+ Parkmaster Pro
Anyone with a hankering for extreme 3D aerobatics is going to want one of these, no question. For the would-be 3D pilot it’s the perfect outdoor practice tool, being light, responsive, yet massively forgiving, whilst those with a bit of experience will instantly fall in love. Sure enough whether you’re flying in very confined spaces or even moderate wind you’ll confidently be able to fly the full 3D and pattern aerobatic repertoire, from tumbles and torque rolls to square loops and rolling circles.Adopting square-section carbon fibre spars the ParkMaster Pro boasts an unbeatably rigid fuselage, wing and tailplane along with a similarly tough carbon reinforced undercarriage and motor mount support.
Speaking of which, there’s a redesigned motor mount too which facilitates the use of even more powerful motors and is a real eye-catcher when combined with the optional carbon motor bulkhead.Designed, manufactured and packaged in typically diligent Multiplex style this is a model you’ll thoroughly enjoy assembling, delight in decorating (a plotted decal sheet is included) and be thrilled to fly.
Part No: 25264275
Item Name: Kit+ Parkmaster Pro
Multiplex Tucan Aeroplane ARTF
Click here to see a slideshow.
A sleek low-wing model with detailed cockpit, clear canopy, stylish decal sheet and strong undercarriage. The TUCAN makes a great trainer or team flyer, and provides any amount of flying fun.Sound, carefully considered design has produced a machine with a superb performance combined with good-natured handling.This ELAPOR model offers an outstanding set of new and sophisticated detail features which set entirely new standards in its class.
Moulded ELAPOR components for fuselage, wing and tail panels, cockpit and spinner.
Tubular CFRP wing spars, laser-cut plywood fuselage parts, vacuum-moulded canopy in clear tinted plastic, moulded plastic components and pre-formed wire parts for fixed tricycle undercarriage, three air-wheels. All small plastic parts and linkage components required to assemble the model, 5 mm Ø propeller driver, pre-cut decal sheet, “Tucan” power set, Li-Batt powered, four Tiny S servos, one Tiny S MG servo, four 30 cm extension leads and comprehensive instructions.• Docile low-wing aircraft with aerobatic capabilities• Fuselage incorporates “M-Frame technology” for extreme strength• Clear canopy with highly detailed cockpit• Can be fitted with optional retract system• Range of optional well-matched power sets available.
5 Channel (Required)
Part No: 25264284
Item Name: Multiplex Tucan Aeroplane ARTF
Multiplex RR Pilatus PC-6 Blue with Brushless Motor
Click here to see a slideshow.
3S 11.1v 2200mAh (Rec.)
Approx 7 min (3S 2200mAh)
6 Channel (Rec.)
Part No: 25264290
Item Name: Multiplex RR Pilatus PC-6 Blue with Brushless Motor
MPX RR Stuntmaster 3D
Click here to see a slideshow.
The Stunt Master - ideal for learning and practice of 3D aerobatics. The ELAPOR model is extremely robust and highly manoeuvrable in web loops, torque rolls or knife edge spins. This ELAPOR model 80% built, including drive motor Permax BL-O from 2206 to 1050, regulators MULTIcont BL-18 SD, propeller 9x5 ", 3 servos MS-12016, including decoration and extensive manual. • Extremely Rigid by CFRP reinforcements • Powerful brushless motor for vertical climbs
• Almost fully assembled out of the box • Stylish decor finish
3S 11.1v 450mAh (Req.)
4 Channel (Req.)
Part No: 25264293
Item Name: MPX RR Stuntmaster 3D
Multiplex MiniMag RR W/ESC and Servos
The MiniMag is compact, handy, car boot and beginner friendly. Constructed from Elapor foam producing an extremely robust model. The model is ready for either 3 ch or 4ch installation. Accessories include hinges and servo mountings.- Easy access to radio – no screws required- Plastic motor mount and permax 400 included- Optional tuning with permax BL22/18 motor- Large full colour sticker set and full instructions- Optional float set available Includes 2 pre fitted Multiplex Nano-S servos and X-08 Speed controller.
Just add TX, RX and battery and fly.
2 x Nano-S (inc)
Multiplex X-08 (inc)
Part No: 264211
Item Name: Multiplex MiniMag RR W/ESC and Servos
Multiplex FunCub RR
The multi-talented all-rounder, take off wherever you fancy - that's what the FunCub lets you do. Thanks to the large, lightweight EPP wheels and powerful brushless power train you can takeoff and land this model from virtually any airstrip. Those big wheels, oversized prop and a power system with plenty of "oomph" - are the perfect recipe for big flying fun in at smaller sites. We can even offer a floats set, converting the FunCub into an excellent aircraft for water or snow. It’s simply a great all-rounder.
With its docile flying characteristics and super slow-flying characteristics the FunCub is great for the beginner while he learns to fly, while the advanced pilot can impress on-lookers with spectacular aerobatics (loops, rolls, inverted).• Low minimum airspeed• Ultra-docile flying characteristics• Suitable for aero-towing gliders (e.g. EasyGlider- size)• High-performance power set available• Optional large landing flaps• Detachable canopy eases battery changing• Two-part wing makes transportation easyFeatures durable moulded ELAPOR parts, GRP spars, all small plastic items and linkage components, decal sheet, comprehensive illustrated instructions.
Additional items may be required to complete this model. If you require further information please contact us for assistance.
Part No: 264243
Item Name: Multiplex FunCub RR
Multiplex RR Razor MPX
Click here to see a slideshow.
This small, highly manageable electric racing aircraft is a great choice for the ambitious model pilot looking for a real adrenalin rush. It’s a model with modern air-racer looks, easily capable of a full aerobatic schedule.With its lightweight airframe and carbonreinforced ELAPOR components the RAZZOR is extremely precise in the air, as well as being robust enough to survive high-speed manoeuvres and hard landings.Kit contents: ELAPOR-Modell 95% factory-assembled, inclusive PERMAX BL-O 2316-1400 motor, speed controller MULTIcont BL 15, Propeller 7x6", 4 Servos MS-9004, decal sheet and comprehensive instruction.
High-speed brushless power systemExtra-strong, carbon-reinforced wings and tailAttractive racing decals already appliedLarge removable fuselage top section for ease of maintenanceEasily detachable wings for ease of transport
Part No: 264280
Item Name: Multiplex RR Razor MPX
RC Factory Crack Pitts
Crack PITTS MINI series
The Crack Pitts Mini is the most high performance 3D and Xtreme Aerobatic small EPP biplane on the market! The Mini evolved out of our quest for a small super high-performance plane that could be flown literally anywhere, in any space, yet improve on the over the top performance of the original Crack Pitts. Through our extensive design and testing program over the last year we have honed in on the exact wing loading, power to weight ratio and developed the new airframe tweaks needed to excel in this smaller size.
...The result is going to be the most fun plane that you have ever had!
250 2S (25C)
2 x 4g, 1x 6g
Part No: 401325
Item Name: RC Factory Crack Pitts
Showing 11 - 20 of 234 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.