Cars & Vehicles RC
On Road Cars
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Cars & Vehicles RC
On Road Cars
Filter By Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Where are we?
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
Tamiya XB RTR Zakspeed Turbo Capri
This is a fully factory assembled and ready-to-run R/C model of the Ford Zakspeed Turbo Capri Gr.5 Wurth. The painted and finished super detailed polycarbonate body is mated to the easy to maintain TT-02 4WD on-road chassis platform. The TT-02 chassis features a 4WD drive drive-train with fully independent double wishbone suspension. The pre-installed 2-channel radio gear system operates on 2.4Ghz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.The TT-02 is the new standard in Tamiya's entry level cars.
The chassis has the battery pack and motor placed longitudinally on the left and right sides of the chassis respectively. The skid-shaped lower deck enables a greater roll movement range during cornering, and the 4-wheel double wishbone suspension is equipped with identical left/right suspension arms and uprights, making maintenance and assembly a simple task. The drivetrain features a motor mount which allows up to 10 different gear ratios as well as front and rear enclosed gearboxes equipped with resin 4-pinion differentials. In addition, 2-types of ground clearance and wheelbase length are possible by altering parts position, making it a flexible machine too.The Ford Zakspeed Turbo Capri Gr.5 Wurth was the result of the collaboration between the legendary Zakspeed racing team and Ford. It achieved excellent results throughout its racing career, the highlight being in the 1981 season in which it blew away its rivals.
7.2 Ni-MH (Req.)
540 Brushed (Inc.)
Tamiya Finespec 2.4GHz (Inc.)
Part No: 57863
Item Name: Tamiya XB RTR Zakspeed Turbo Capri
XB Porsche Carrera 911
This is a fully factory assembled and ready-to-run R/C model of the Porsche 911 Carrera RSR "White Version" car. The painted and finished super detailed polycarbonate body is mated to the easy to maintain TT-01 Type E 4WD on-road chassis platform.The TT01 Type E chassis features a 4WD drive drive-train with fully independent double wishbone suspension. The pre-installed 2-channel radio gear system operates on 2.4GHz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
Part No: 57874
Item Name: XB Porsche Carrera 911
Tamiya XB Low Ride Pumpkin
This is a fully factory assembled and ready-to-run R/C model of the Lowride Pumpkin. The painted and finished super detailed ABS molded body is mated to the easy to maintain rear wheel drive M-06 chassis platform.The M06 chassis features a 2WD rear-drive drive-train with fully independent double wishbone suspension. The layout features a longitudinally-mounted battery with the R/C components positioned on either side. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip radial tires for improved rear traction.
The pre-installed 2-channel radio gear system operates on 2.4GHz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
540 Brushed (Inc.)
Finespec 2.4GHz (Inc.)
RTR (Ready to Run)
Part No: 57879
Item Name: Tamiya XB Low Ride Pumpkin
Tamiya 1/10 Fiat 500 (M-03M Chassis)
1957 saw Italian car manufacturers Fiat release the first Nuova 500 which went on to be a very popular little car. 50 years later in 2007, Fiat has enjoyed amazing success with their modern interpretation of the vehicle, the Fiat 500. The Fiat 500 was enthusiastically received by the consumer market not only in Italy but worldwide with the first production lot selling out within 3 weeks.• The Fiat 500's body is accurately reproduced with a vacuum formed polycarbonate shell.• New parts for side mirrors and wheels.
• Type 540 motor is installed on the excellent M-03M Chassis.• Front mounted motor; 2WD front wheel drive.• Tread pattern rubber tires with inner sponge included.• 4-wheel independent double-wishbone suspension with friction dampers provides excellent handling.• ESC (TEU-101BK) included.• Battery pack & charger and 2-channel R/C system separately required.
Part No: 58427
Item Name: Tamiya 1/10 Fiat 500 (M-03M Chassis)
Tamiya 1/10 Mini Cooper Racing
After 10 years since the release of the first M-series R/C car, Tamiya is now releasing the latest M-05 chassis with the popular Rover Mini Cooper racing version body.• This is a 1/10 R/C assembly kit.• The very popular Mini Cooper Racing car comes loaded on the new M-05 chassis.• The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.• The 3-piece tie-rod steering linkage offers sharp cornering performance.
• Sticker sheet included.• Includes 60D radial tires and silver Rover Mini Cooper wheels.• ESC and type 540 motor included.• 2-channel R/C system, battery pack & charger are separately required.
Part No: 58438
Item Name: Tamiya 1/10 Mini Cooper Racing
Tamiya Ferrari 599XX (TA-06)
Tamiya started the modern touring car standard with the TA-01, which was first released in 1992. This 6th generation Tamiya 4WD touring car chassis kit places a focus on optimum weight distribution when paired with brushless motors and light weight batteries. This new generation 4WD machine was also created using input from the World Championship TRF team. The battery pack and motor are positioned along the centerline of the slim monocoque frame and the Dual-Drive system features belt-driven front and gear-driven rear wheels to provide efficient, yet sharp power transfer.
The front suspension can be assembled as an IFS setup with inboard dampers and rocker arms optimized for short reversible suspension arms or a standard outboard damper set up. By using the IFS layout in the front you are able to use Tamiya sports car and touring car body sets with low slung noses. With front and rear gear differential units also included, this chassis offers more customization possibilities and an extended maintenance cycle.The body mounted on this standard spec TA-06 is the Ferrari 599XX. In 2009, Ferrari unveiled the 599XX, an extreme circuit-only machine incorporating a number of innovative technologies taken from Ferrari's racing experience. This machine featured exceptional performance as well as advanced electronics to help the driver record the best lap times possible on the track. It also featured extensive use of carbon-fiber material as well as a 5,999cc V12 DOHC engine capable of 700 Horse power/9,000rpm matched with a 6-speed manual transmission. It had a stylish, aerodynamic body and the "ACTIFLOW" system which controlled airflow around the machine to provide increased down-force without extra drag.
Specs and Features:
• Oil filled Dampers• 4WD, independent double wishbone suspension system• Dog-bone drive axles.• Low-Friction Drive Belts (174mm, 453mm)• Aluminum Motor Plate• Full Ball Bearings• Steel Turnbuckle Shafts• Steel Ball Connectors• Standard Servo Saver• The motor is installed at the mid-rear position which helps improve traction for the rear wheels.• Comes equipped with aluminum motor plate and aluminum spur gear holder from the TA-05 chassis platform.• Compatible with TA05 and TA06 touring car and sports car body sets• Suspension parts from the previous TA-05 platform are used on the new TA-06. (short reversible suspension, steering blocks, castor blocks and optional aluminum suspension mounts) are all transferable• Molded plastic parts are made of durable FRP (Fiberglass Reinforced Plastic)• Chassis battery compartment is compatible with NiCd, NiMh, LiFe and LiPo battery technologies.• The battery pack can be accessed from the underside of the chassis by removing the battery cover.• Two front suspension configurations: IFS (Inboard Front Suspension using rocker arms) and • Standard outboard suspension is possible with the kit-included damper stay parts.• Polycarbonate Ferrari 599xx body included with stickers and window masking tape• Speed Controller: electronic speed controller(Not included)
Part No: 58506
Item Name: Tamiya Ferrari 599XX (TA-06)
Tamiya 1/10 Mini JCW Coupe Kit
This is a Radio Control replica of the MINI JCW Coupe race car, which raced in the SP 3T class at the 39th ADAC Zurich 24 Hours of Nurburgring 2011. This car was based on the new 2-seater MINI Coupe and features race-spec modifications including a sharper windshield angle, adjustable suspension and rear wing, and a 247hp 1.6-liter four-cylinder twin-scroll turbo engine that enables a top speed of 240km/h. The Tamiya RC car is built on the popular M-05 M-Chassis platform, which is easy to build and fun to drive.• 1/10 scale R/C assembly kit.• Polycarbonate body, rear wing and light bucket cases included.• Separately-molded side mirrors are made of ABS plastic.• Body is mounted on the nimble front wheel-drive M-05 chassis with long wheelbase (239mm).• M0-5 Chassis features front wheel drive, independent double wishbone suspension with friction damper units.• Gear differential included.• Vinyl sticker sheet and masking seals for windows included.• Includes 540 motor and Tamiya TEU-104BK ESC.
Part No: 58520
Item Name: Tamiya 1/10 Mini JCW Coupe Kit
Tamiya 1/10 Subaru BRZ TT-01E
• This is a 1/10 scale R/C assembly kit.• The sporty form of the BRZ has been realistically reproduced by the polycarbonate body. Separately-molded polycarbonate light cases included.• Injection-molded side mirror parts also included.• Sticker sheet and window masks included.• The TT-01 Type-E chassis features shaft-driven 4WD system to offer easy handling and great customizability.
Part No: 58545
Item Name: Tamiya 1/10 Subaru BRZ TT-01E
Tamiya 1/10 VW Classic Beetle (M-06
The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and the iconic car saw military service during the Second World War. The R/C model of this car was released in 1996 on the M-04 chassis. The 2013 model now sits on the modern and highly popular rear wheel drive M-06 chassis platform.
7.2V NiMH (Req.)
2 Channel (Req.)
1x Standard (Req.)
Part No: 58572
Item Name: Tamiya 1/10 VW Classic Beetle (M-06
Tamiya 1/12 Lowride Pumpkin (M-06)
Get the Lowdown on a Trendy Pick-Up! In the U.S, pick-up trucks are increasingly used less for work purposes and more as personal vehicles, one prominent trend being to customize classic 1950s models. This R/C model assembly kit depicts such a classic pick-up which has been customized to make it a lowrider, and features a bulging engine hood and roll bar that ooze authenticity. Stickers are also included to add wild markings to the model.
Improved RR Performance from the M-06
The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C units positioned on either side for optimum balance and a low center of gravity.
4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. Large bumper is included.
Type 540 (Included)
Part No: 58594
Item Name: Tamiya 1/12 Lowride Pumpkin (M-06)
Showing 11 - 20 of 61 Results
items per page.
Your Basket is Currently Empty
Terms & Conditions
© Slough Radio Control Models 2018. All Rights Reserved.