Slough Radio Control Models Slough Radio Control Models - Home
Home My Basket Checkout Account Help Login
See our Videos on YouTubeFollow us on TwitterLike us on FaceBookRead our Articles on Blogger
Search  First for Mail Order 
All Products > "A-STM030 DG1000 EP ARTF ST Models"



Click here to see our contact details, a detailed map, and our in-store opening times.
Click on the image above to see our contact details, a detailed map, and our in-store opening times.
A-STM030DG1000 EP ARTF ST Models£134.99
DG1000 EP ARTF ST Models - a-stm030
If you fancy something that is truely unique and stylish then the ST Models DG1000 could be the model for you. Based on the classic DG1000 glider, this gorgeous model is accurately moulded in impact resistant EPO foam, even those sexy wing tips!

The wings are removable for easy transport by just releasing one screw and are re-inforced with carbon tube to ensure rigidity and strength. The aileron servos are pre-installed, as are the servo extension leads and each aileron hinge is formed by the EPO foam for best efficiency. The fuselage is also moulded in EPO foam with carbon fibre re-inforcement and the elevator and rudder pushrods pre-installed and connected to their respective servos. Just bolt on the tail and the assembly is done!

Now we come to the clever bit! Not only do you get a powerful, 1500kv, outrunner brushless motor, propeller and ESC as standard, you get a unique motor retraction system to fold it away into the fuselage. That system is servo driven and cleverly controlled by a special mixer unit (supplied). Closing the throttle stops the propeller and motor before fully retracting and closing the doors. This all operates from the throttle stick alone. Just nudge the throttle open again and the motor swings up before operating. If you use the optional switched channel, you can opt top keep the motor out and just control the throttle as normal. When the motor is away, the model becomes highly efficient and will stay aloft in minimal lift conditions. Just fit a 3S 1300mah Li-Po battery plus receiver of your choice and you're ready to go. The power is sufficient for a pretty rapid ascent and you will get many climbs from one charge. From opening the box to going flying will take less than one hour!

Please Note: Additional items may be required to complete this model. If you require further information please contact us for assistance.

LiPo:3S 1300mAh 20C
Build Type:ARTF
Electric Motor:1500kv Brushless (inc)
Length:970mm (38.2")
Radio:4 - 5 Ch.
Servos:4x Micro, 1x Std.Hi-Tq (inc)
ESC:18A (inc)
Wingspan:2010mm (79.1")
ST Model

This item is currently out of stock.
Email me when availabe!


Part No: A-STM030
Item Name: DG1000 EP ARTF ST Models
Brand: ST Model
See Spares for

See Further Items Recommended for DG1000-EP-ARTF-ST-Models
Your Basket is Currently Empty 
Follow SloughRCModels on Twitter
SRCM Facebook
Verified by Visa